Accessing Local Management2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide5-75.4 ACCESSING LOCAL MANAGEMENTAccess to Local Management is controlled through the Password screenFigure 5-3. Whenever a connection is made to the 2E4X-27 the Passwordscreen displays. Before continuing, the user must enter a password(community name) which is compared to the previously storedpasswords. The level of access allowed the user depends on the password.To set or change passwords, refer to Section 5.8. The following stepsdescribe the procedure to access Local Management.1. Turn on the terminal. Press ENTER (this may take up to four times,because the COM port auto-senses the baud rate of the terminal) untilthe 2E4X-27 Local Management Password screen displays. It is theautomatic line speed seeking feature of the port that makes it necessaryat times to press ENTER several times.Figure 5-3 The 2E4X-27 Local Management Password Screen2. Enter the Password and press ENTER. The default super-user accesspassword is “public” or press ENTER.2E42-27 LOCAL MANAGEMENTCABLETRON Systems, IncorporatedP.O.Box 5005Rochester, NH 03866-5005 USA(603) 332-9400(c) Copyright CABLETRON Systems, Inc, 1997Device Serial Number: XXXXXXXXXDevice Hardware Revision: XXDevice Firmware Revision: X.XX.XXDevice BOOTPROM Revision: X.XX.XXEnter Password:19601-12Event Message Line
