Chapter 5: Local Management5-142E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide5.6 DEVICE CONFIGURATION MENU SCREENThe Device Configuration Menu screen, Figure 5-8, provides access toLocal Management screens that allow you to configure and monitoroperating parameters, modify SNMP community names, set SNMP traps,configure switch parameters and configure 2E4X-27 ports.To access the Device Configuration Menu screen from the Device Menuscreen, use the arrow keys to highlight the DEVICECONFIGURATION menu item and press ENTER. The DeviceConfiguration Menu screen displays.Figure 5-8 Device Configuration Menu ScreenNOTEThe following menu items on the Device Configuration Menuscreen may not display if the operational mode of the device isset to SECURE FAST VLAN:SWITCH CONFIGURATIONSMARTTRUNK CONFIGURATIONRefer to the Release Notes to see if the above screens aresupported in SECURE FAST VLAN mode. Section 5.7.9describes how to set the operational mode.Firmware Revision: XX.XX.XXDevice Configuration MenuGENERAL CONFIGURATIONSNMP COMMUNITY NAMESSNMP TRAPSSWITCH CONFIGURATIONETHERNET FULL DUPLEX CONFIGURATIONSMARTTRUNK CONFIGURATIONDEVICE SPECIFIC CONFIGURATION19601_66Device Type: 2E42-27BOOTPROM Revision: XX.XX.XX2E42-27 LOCAL MANAGEMENTRETURNEXIT
