Interface Statistics Screen2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide5-67Frames Rcvd (Read-Only)Displays the number of frames received by the interface since lastpower-up or reset.Frames Txmtd (Read-Only)Displays the number of frames transmitted by the interface since lastpower-up or reset.Frames Fltrd (Read-Only)Displays the number of frames filtered by the interface since lastpower-up or reset.Frames Frwded (Read-Only)Displays the number of frames forwarded by the interface.[1-12], [13-24], or [25-27] (Navigation Key)When the Switch Statistics screen displays, the statistics are displayed forthe first 12 ports. These fields allow the user to step to a second or thirdscreen for the same type of information for ports 13 through 24 or 25through 27. While on the second or third screen, the user can navigateback to earlier screens by highlighting the [1-12] and/or [13-24] fields andpressing ENTER.CLEAR COUNTERS (Command)This command clears all the counters of the ports displayed to zero. Toclear the counters, use the arrow keys to highlight CLEAR COUNTERSat the bottom of the screen, then press ENTER.5.21 INTERFACE STATISTICS SCREENThe Interface Statistics screen, Figure 5-28, is used to gather MIB-IIstatistics for all the 2E4X-27 interfaces with the exception of an installedHSIM.NOTECabletron Systems HSIMs gather their own statistics, and maybe viewed via the Local Management screens of the applicableHSIM. Refer to your HSIM documentation for information onhow to access these screens.
