Chapter 2: Basic System Configuration2-429A656-04 and 9A600 Configuration Guide2.20 PORT ERRORS SCREENThe Port Errors screen is a read-only screen that is used to view all errors that have occurredon each interface. The screen displays errors that have been both received and transmittedfrom the interface.To access the Port Errors screen, perform the following steps:1. Use the arrow keys to highlight the PORT ERRORS menu item on the ModuleConfiguration menu screen.2. Press ENTER. The Port Errors screen, Figure 2-23, displays.Figure 2-23 Port Errors Screen2.20.1 Port Errors Screen FieldsThe following section provides definitions of the Port Errors screen fields:INTERFACEThis field displays all front panel interfaces. The last six digits of the Interface field representthe ANIM number and port number of that ANIM respectively. For example, the first entry ofthe Interface field in Figure 2-23 (00010101) indicates that this interface is port 1 of ANIM 1of the individual board that has been selected from the Module Selection screen (Figure 2-9).NOTE Due to the fact that the 9A656-04 uses 64 bit counters, values on this screen aredisplayed in hexadecimal format.
