Cabletron Systems CyberSWITCH CSX5500 Quick Start Manual

Also see for CyberSWITCH 5500: User guide Manual

Contents

QUICK START34 CyberSWITCH6. Security tab: Select option Accept any authentication including clear text.7. X.25 tab: Ensure the Network setting is (none).8. Your phone book entry setup is now complete. Click OK.Make a Connection to the Remote NetworkYou are now ready to attempt a connection to the remote network. From the Dial-Up Networkingmenu, click Dial.Enter in your User name (Remote) and Password (Remote_S). Leave the Domain section empty, andclick OK. Windows NT will dial the remote network and make the connection, giving you fullaccess to the network just as if you were on-site.C ONFIGURATION OF S ITE “REMOTE” ON WINDOWS 95This section describes:• the setup of a new number for dial-up networking under Windows 95• the process of dialing a newly set-up numberInstalling Network Protocols1. From the Control panel, open Network.2. On the Configuration tab of the Network dialog box, ensure that Client for MicrosoftNetworks, TCP/IP, and Dial-Up Adapter are installed. If they are go to step 9. If they are notinstalled, click Add.3. Select Client as the network component type to install. Click Add.4. Select Microsoft and then Client for Microsoft Networks. Click OK.5. Click Add again from the configuration tab of the Network dialog box.6. Select Protocol as the network component to install. Click Add.7. Select Microsoft and then TCP/IP. Click OK.8. Restart your machine when prompted.9. From the Control Panel, open Network.10. Select TCP/IP and click Properties.11. On the IP address tab, enter 101.78.1.2 for the IP address.Note: If the IP address pool is enabled on the Central, you may select Obtain an IP addressautomatically.