Chapter 7: General Configuration Using Local ManagementHSIM-W6 User’s Guide 1213. Repeat steps 1 and 2 until the Main Menu screen displays.4. Use the arrow keys to highlight the EXIT command at the bottom of the Main Menu screen.5. Press ENTER. The HSIM-W6 Local Management Password screen displays and the LocalManagement session ends.Local Management Screen HierarchyLocal Management consists of a series of menu screens that provide a path to each of the LocalManagement function screens. Navigate through Local Management by selecting items from themenu screens. Figure 50 shows the hierarchy of the Local Management screens.Figure 50 Hierarchy of Local Management ScreensAccessing Local ManagementThis section explains how to access and use the Local Management menu screens. Menu screensprovide a path to the setup screens and status screens.Establishing a TELNET ConnectionThe HSIM-W6 is shipped with a temporary IP address of 192.168.254.254 so that your computercan communicate with it over your Local Area Network (LAN) through a TELNET connection.However, to establish a TELNET connection, your computer must be on the same subnet as theHSIM-W6. Cabletron Systems recommends that you assign a temporary IP address of192.168.254.253 to your computer to ensure that both devices are on the same subnet. TELNETconnections to the host device require the community name passwords assigned at the SNMPCommunity Names screen or if you are doing an initial configuration, use the default passwordpublic. Refer to the SNMP Community Names section of this manual for additional informationabout community names.Main MenuPasswordSetup MenuSystem LevelSNMP Community NamesSNMP TrapsMIB NavigatorFlash DownloadBridge SetupRouter SelectWAN SetupIPIPXIP ConfigurationIP RIPIPX ConfigurationIPX RIPIPX SAP
