Chapter 4: Planning for HSIM-W6 ISDN Configuration32 HSIM-W6 User’s GuideNetwork Information DiagramsIt is helpful to draw a diagram including all locations, addresses, router names, etc. This sectionincludes diagrams needed to configure the HSIM-W6. You may need different addressinginformation depending on whether you are configuring IP routing and/or NetWare IPX routing.TCP/IP Routing — An IP address and subnet mask are required for the Ethernet LAN for therouter connection. Each remote router ISDN WAN link may have local and remote IP addressesand subnet masks depending on the type of IP addressing as shown in Figure 5. The IP routingtable in the HSIM-W6 can be “seeded” with addressing information for networks/stations beyondthe remote router.Figure 5 Network Information LayoutNOTEThe diagrams show the information required to configure only the HSIM-W6. If you needto configure both ends of the WAN link, you should label all information for the network.NETWORK INFORMATION LAYOUTETHERNET LANIP ADDRESSSUBNET MASKGATEWAYISDN LINESWITCH TYPESPIDs, DNsISDNCSX200 WAN IPADDRESSSUBNET MASK(IF REQUIRED)REMOTE ROUTERWAN IP ADDRESSSUBNET MASK(IF REQUIRED) REMOTE ISDNPHONE NUMBERSREMOTE ROUTERROUTER NAMEPAP/CHAP PASSWORDREMOTE LAN NETWORKIP ADDRESSESSUBNET MASKSMETRICSNETWORK AND STATIONS BEYONDTHE REMOTE ROUTERPC100_10SYSTEM NAMEMESSAGE PAP/CHAPPASSWORDHSIM-W6
