Chapter 7: General Configuration Using Local Management136HSIM-W6 User’s GuideThe following definitions explain each of the Flash Download screen fields.Download Method — Use this field to select the method you wish to use to download thefirmware image to the HSIM-W6.• Reboot After Download – This field displays when the RUNTIME Download Method ischosen. Selecting YES forces the HSIM-W6 to reboot and use the new firmware imageimmediately. Selecting NO allows the HSIM-W6 to continue using the existing firmware imagewithout interrupting network operation.• Commit to Flash – This field displays when the BOOTPROM Download Method is chosen.Selecting YES allows the HSIM-W6 to continue using the existing firmware image withoutinterrupting network operation and selecting NO allows the HSIM-W6 to reboot and use thenew firmware image immediately.• TFTP Gateway Server IP – This field displays when the BOOTPROM Download Method ischosen. Use this field to enter the IP address of the TFTP Gateway Server.Last Image Server IP — Displays the IP address of the last server used to download a firmwareimage to the HSIM-W6.Last Image File Name — Displays the file name of the last firmware image downloaded to theHSIM-W6.Download Server IP — Use this field to type in the IP address of the server from which you wishto download the firmware image.Download File Name — Use this field to type in the file name of the firmware image you wish todownload to the HSIM-W6.Selecting a Flash Download Method1. Use the arrow keys to highlight the Download Method field.2. Press SPACE or BACKSPACE to select a flash download method.• If you select RUNTIME, the Reboot After Download field displays.• If you select BOOTPROM, the Commit to Flash field and the TFTP Gateway Server IP fielddisplay.
