LOCAL MANAGEMENT5-105. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen and press the Return key (or press F6). The message“SAVED OK” appears indicating that your edits are saved to memory.Please note that the first time you try to exit the screen without savingyour changes you will get a “NOT SAVED?” message. If you proceedto exit without saving, you will lose your edits.6. Exit the screen by either pressing the appropriate Function key or byusing the arrow keys to highlight the RETURN command andpressing the Return key. The RETURN command will exit you to theFeature Selection screen.5.4 CONFIGURING THE MRXIAt the MRXI Configuration screen, you can assign the IP address andsubnet mask.The Configuration screen also lets you:• Set the default gateway• Use the Port Lock Override• Use the Port Enable Override5.4.1 Accessing the Configuration ScreenTo access the Configuration screen from the Features Selection screen,use the arrow keys to highlight the IP Address Assignment option andpress the Return key, or press F7. The Configuration screen, Figure 5-7,appears.
