LOCAL MANAGEMENT5-173. Use the arrow keys to highlight the Traps field and enter Y (or y) tosend alarms from the MRXI to the workstation, and N (or n) to preventalarms from being sent.4. Press the Return key.5. Use the arrow keys to highlight the appropriate Trap IP Addressfield.6. Enter the IP address of the workstation to send traps using this field.The format for this entry is XXX.XXX.XXX.XXX, with the value ofXXX ranging from 0 to 255, and three dots, or else it returns to thebeginning of the field.7. Use the arrow keys to highlight the SAVE option and press Return (orpress F6). The message “SAVED OK” appears.Please note that if you attempt to exit the screen without saving yourchanges, a “NOT SAVED?” message appears. If you proceed to exitwithout saving, you will lose your edits.8. To exit the Trap Table screen, press the appropriate Function key. Tochoose the Feature Selection screen, use the arrow keys to highlightthe RETURN command and press the Return key.Alarms for these traps will now be sent to the designated IP addressesfrom the MRXI.5.6 SNMP TOOLSThis section describes how you can use the SNMP Tools screen to accessManagement Information Bases (MIBs). Access to screen optionsdepends on the access status accorded to your community name. Thissection describes super-user management capabilities.