Press a button to turn on the desired feature. A light onthat button will display to show which feature is on.There are three temperature settings for each feature.A column of three lights next to the buttons willdisplay which setting the feature is in: high, mediumor low. Three lights indicate the highest setting,two lights for medium and one light for the lowestsetting.When you press a button, the feature will turn on atthe highest setting. Each time you press the button,the feature will go down one temperature setting.To turn the feature off, keep pressing the button untilthe display lights turn off.If your vehicle has remote vehicle start and is startedusing the remote keyless entry transmitter, the frontheated seats will be turned on to the high setting if itis cold outside. See “Remote Vehicle Start” underRemote Keyless Entry (RKE) System Operation onpage 2-5. When the key is inserted into the ignitionand the ignition is turned on, this feature will turn off.To turn it back on, press the desired button.Memory Seat, Mirrors andSteering WheelYour vehicle may have the memory package.The controls for this feature are located on the driver’sdoor panel, and are used to program and recallmemory settings for the driver’s seat, outside mirror,and the steering wheel position if the vehicle hasthe power tilt wheel and telescopic steering feature.To save your positions in memory, do the following:1. Adjust the driver’s seat, including the seatbackrecliner and lumbar, both outside mirrors, andthe steering wheel to a comfortable position.2. Press and hold button 1 until two beeps soundthrough the driver’s side front speaker to let youknow that the position has been stored.1-4
