/(Remote Vehicle Start): If your vehicle has thisfeature, press / to start the engine from outside thevehicle using the RKE transmitter. See RemoteVehicle Start on page 2-7 for additional information.& (Power Liftgate): Press and hold & onthe RKE transmitter to open and close the liftgate. Thetaillamps will flash and a chime will sound to indicatewhen the liftgate is opening and closing.m (Liftglass): Press and hold m on the RKEtransmitter to open the liftglass.L(Vehicle Locator/Panic Alarm): Press and releaseL to locate your vehicle. The turn signal lamps willflash and the horn will sound three times.Press and hold L for more than two seconds toactivate the panic alarm. The turn signal lamps will flashand the horn will sound repeatedly for 30 seconds.The alarm will turn off when the ignition is movedto ON/RUN or L is pressed again. The ignition mustbe in LOCK/OFF for the panic alarm to work.Matching Transmitter(s) to YourVehicleEach RKE transmitter is coded to prevent anothertransmitter from unlocking your vehicle. If a transmitteris lost or stolen, a replacement can be purchasedthrough your dealer/retailer. All transmitters need to bere-coded to match the new transmitter. The losttransmitter will no longer work after the new transmittersare re-coded. The vehicle can have a maximum ofeight transmitters matched to it.Battery ReplacementReplace the battery if the REPLACE BATTERY INREMOTE KEY message displays in the DIC. See“REPLACE BATTERY IN REMOTE KEY” under DICWarnings and Messages on page 3-53 for additionalinformation.Notice: When replacing the battery, use care not totouch any of the circuitry. Static from your bodytransferred to these surfaces may damage thetransmitter.2-6
