EXIT LIGHTINGThis feature allows you to select the amount of time youwant the exterior lamps to remain on when it is darkenough outside. This happens after the key is turnedfrom ON/RUN to LOCK/OFF.Press the customization button until EXIT LIGHTINGappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Thenpress the customization button to scroll through thefollowing settings:OFF: The exterior lamps will not turn on.30 SECONDS (default): The exterior lamps will stay onfor 30 seconds.1 MINUTE: The exterior lamps will stay on forone minute.2 MINUTES: The exterior lamps will stay on fortwo minutes.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.APPROACH LIGHTINGThis feature allows you to select whether or not to havethe exterior lights turn on briefly during low lightperiods after unlocking the vehicle using the RemoteKeyless Entry (RKE) transmitter.Press the customization button until APPROACHLIGHTING appears on the DIC display. Press theset/reset button once to access the settings forthis feature. Then press the customization button toscroll through the following settings:OFF: The exterior lights will not turn on when youunlock the vehicle with the RKE transmitter.ON (default): If it is dark enough outside, the exteriorlights will turn on briefly when you unlock the vehiclewith the RKE transmitter.The lights will remain on for 20 seconds or until the lockbutton on the RKE transmitter is pressed, or thevehicle is no longer off. See Remote Keyless Entry(RKE) System Operation on page 2-4 for moreinformation.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-65
