MEMORY SEAT RECALLThis feature allows you to select your preference for theremote memory seat recall feature. See Memory Seat,Mirrors, and Pedals on page 1-6 for more information.Press the customization button until MEMORY SEATRECALL appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the customization button to scroll throughthe following settings:OFF (default): No remote memory seat recall will occur.ON: The driver’s seat, and on some vehicles, theoutside mirrors will automatically move to the storeddriving position when the unlock button on the RemoteKeyless Entry (RKE) transmitter is pressed. Onsome vehicles with the adjustable throttle and brakepedal feature, the pedals will also automatically move.See “Relearn Remote Key” under DIC Operationand Displays on page 3-49 for more information onmatching transmitters to driver ID numbers.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.REMOTE STARTIf your vehicle has this feature, it allows you to turn theremote start off or on. The remote start feature allowsyou to start the engine from outside of the vehicle usingthe Remote Keyless Entry (RKE) transmitter. SeeRemote Vehicle Start on page 2-7 for more information.Press the customization button until REMOTE STARTappears on the DIC display. Press the set/resetbutton once to access the settings for this feature. Thenpress the customization button to scroll through thefollowing settings:OFF: The remote start feature will be disabled.ON (default): The remote start feature will be enabled.NO CHANGE: No change will be made to thisfeature. The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-68
