4. To match additional transmitters at this time, repeatStep 3.Each vehicle can have a maximum of eighttransmitters matched to it.5. To exit the programming mode, you must cycle thekey to LOCK/OFF.Blank DisplayThis display shows no information.DIC Warnings and MessagesMessages are displayed on the DIC to notify the driverthat the status of the vehicle has changed and thatsome action may be needed by the driver to correct thecondition. Multiple messages may appear one afteranother.Some messages may not require immediate action, butyou can press any of the DIC buttons on the instrumentpanel to acknowledge that you received the messagesand to clear them from the display.Some messages cannot be cleared from the DICdisplay because they are more urgent. These messagesrequire action before they can be cleared. You shouldtake any messages that appear on the display seriouslyand remember that clearing the messages will onlymake the messages disappear, not correct the problem.The following are the possible messages that can bedisplayed and some information about them.CHANGE ENGINE OIL SOONThis message displays when the engine oil needs to bechanged. When you change the engine oil, be sureto reset the CHANGE ENGINE OIL SOON message.See Engine Oil Life System on page 5-16 for informationon how to reset the message. See Engine Oil onpage 5-14 and Scheduled Maintenance on page 6-4 formore information.3-53
