Programming Transmitters to theVehicleOnly keyless access transmitters programmed to thisvehicle will work. If a transmitter is lost or stolen, areplacement can be purchased and programmedthrough your dealer/retailer. The vehicle can bereprogrammed so that lost or stolen transmitters nolonger work. Each vehicle can have up to fourtransmitters programmed to it.Programming with a RecognizedTransmitterA new transmitter can be programmed to the vehiclewhen there is one recognized transmitter. For vehiclessold in Canada, two recognized transmitters arerequired to program a new transmitter.1. The vehicle must be off.2. Both the recognized and new transmitters must bewith you.3. Insert the vehicle key into the key cylinder locatedon the outside of the driver door.4. Turn the key to the unlock position five times withinfive seconds.5. The Driver Information Center (DIC) displaysREADY FOR FOB 2, 3 or 4.6. Place the new transmitter into the transmitterpocket, located inside the center console storagearea located between the driver and frontpassenger seats, with the transmitter buttonsfacing the front of the vehicle.7. A beep sounds once programming in complete.The DIC displays READY FOR 3 or 4, or MAX #FOBS LEARNED.3-7Ofrecido por www.electromanuales.com
