3. Once the zone number displays, press Orepeatedly until the correct zone number displays.Stop pressing the button and the mirror returns tonormal operation. If C appears in the compasswindow, the compass may need calibration.See “Compass Calibration” listed previously.Outside Power MirrorsControls for the outsidepower mirrors are locatedon the driver door.To adjust the mirrors:1. Move the selector switch left or right to choose thedriver side or passenger side mirror.2. Press one of the four arrows located on the controlpad to move the mirror to the desired direction.3. Adjust each outside mirror so that a little of thevehicle and the area behind it can be seen.4. Return the selector switch to the center positionwhen finished adjusting.The preferred mirror positions can be stored with thememory option. See Memory Seat, Mirrors and SteeringWheel on page 3‑75.Manually fold the mirrors inward to prevent damagewhen going through car washes or confined spaces.To fold, push the mirror toward the vehicle. To return themirror to its original position, push outward. Return bothmirrors to their original unfolded position before driving.Outside Automatic Dimming MirrorThe driver side mirror adjusts for the glare of headlampsbehind you. This feature is controlled by the on and offsettings on the automatic dimming inside rearviewmirror. See Automatic Dimming Rearview Mirror onpage 3‑37 for more information.3-39Ofrecido por www.electromanuales.com
