Black plate (20,1)Cadillac Escalade EXT Owner Manual - 20113-20 Seats and Restraints4. If equipped with a shoulder beltheight adjuster, move it to theheight that is right for you. See“Shoulder Belt Height Adjuster”in this section for instructions onuse and important safetyinformation.5. To make the lap part tight, pullup on the shoulder belt.It may be necessary to pullstitching on the safety beltthrough the latch plate to fullytighten the lap belt on smalleroccupants.To unlatch the belt, push the buttonon the buckle. The belt shouldreturn to its stowed position.Before a door is closed, be sure thesafety belt is out of the way. If adoor is slammed against a safetybelt, damage can occur to both thebelt and the vehicle.Shoulder Belt Height AdjusterThe vehicle has a shoulder beltheight adjuster for the driver andright front passenger positions.Adjust the height so that theshoulder portion of the belt iscentered on the shoulder. The beltshould be away from the face andneck, but not falling off the shoulder.Improper shoulder belt heightadjustment could reduce theeffectiveness of the safety belt in acrash.Squeeze the buttons (A) on thesides of the height adjuster andmove the height adjuster to thedesired position.