3. Press the door lock switch once. You will hear one,two, or three chimes. The number of chimes tellsyou which lock mode is currently selected. Continueto press the door lock switch until the number ofchimes that you hear matches the number ofthe mode that you want. If you take longer than 30seconds, the locks will automatically lock andunlock and the horn will chirp twice to indicate thatyou have left the program mode. If this occurs,you can repeat the procedure beginning with Step 1to re-enter the programming mode.You can exit the program mode any time by turning theignition to RUN (the doors will automatically lock andunlock and the horn will chirp twice to indicate that youare leaving the program mode). If the lock/unlockswitches are not pressed while in the programmingmode, the current automatic settings will not bemodified.See your dealer for more information.Programmable Unlocking FeatureThe following is the list of available programmingoptions:Mode 1: Driver’s door unlocks when the transmission isshifted into PARK (P).Mode 2: All doors unlock when the transmission isshifted into PARK (P). This is the mode that ispre-programmed in the factory for your vehicle.Mode 3: All doors unlock when the key is removedfrom the ignition.Mode 4: No automatic door unlock.The following instructions tell you how to change theautomatic door unlock mode. Choose one of thefour programming options listed above before enteringthe program mode. To enter the program mode, dothe following:1. Begin with the ignition off. Then pull the turnsignal/multifunction lever toward you and holdit there while you perform the next step.2-12
