Windshield WipersYou control the windshield wipers by turning the bandwith the wiper symbol on it.8(Mist): For a single wiping cycle, turn the band tomist. Hold it there until the wipers start. Then let go. Thewipers will stop after one wipe. If you want morewipes, hold the band on mist longer.N(Delay): You can set the wiper speed for a long orshort delay between wipes. This can be very usefulin light rain or snow. Turn the band to choose the delaytime. The closer to the top of the lever, the shorterthe delay.6 (Low Speed): For steady wiping at low speed,turn the band away from you to the first solid band pastthe delay settings. For high-speed wiping, turn theband further, to the second solid band past the delaysettings. To stop the wipers, move the band to off.1 (High Speed): For high-speed wiping, turnthe band further, to the second solid band past thedelay settings.9(Off): To stop the wipers, move the band to off.Be sure to clear ice and snow from the wiper bladesbefore using them. If they’re frozen to the windshield,carefully loosen or thaw them. If your blades do becomeworn or damaged, get new blades or blade inserts.Windshield WasherL(Washer Fluid): There is a paddle marked with thewindshield washer symbol at the top of the multifunctionlever. To spray washer fluid on the windshield, pushthe paddle. The wipers will clear the window and theneither stop or return to your preset speed.{CAUTION:In freezing weather, don’t use your washeruntil the windshield is warmed. Otherwise thewasher fluid can form ice on the windshield,blocking your vision.3-10
