![Cadillac SRX 2004 Owner's Manual Manual pdf 197 page image](https://manuals-archive2.s3.amazonaws.com/2832400/22482e865d6a45a62f50308e8f5bc01d197f.jpg)
To program a name, use one of the following procedures:To customize the name using the Base audio system,do the following:1. Enter the Personalization menu by following theinstructions listed previously.2. Select the PERSONALIZATION NAME menu itemby pressing the TUNE/SEL knob once.You will see a cursor on the screen.3. Turn the TUNE/SEL knob until you reach the firstletter you want; the letter will be highlighted. There isa complete alphabet with both upper and lower caseletters and the numbers zero through nine. Alsoincluded are spaces and other non-letter characterssuch as the ampersand (&).4. Press the TUNE/SEL knob once to select the letter.The letter will then appear on the display.If you make a mistake, press the TUNE/SEL knobrepeatedly to cycle through all the charactersuntil you reach the character you wish to change.5. Repeat Steps 2 and 3 until the name you want iscomplete. You can program up to 16 characters.To customize the name using the Navigation system,do the following:1. Enter the Personalization menu by following theinstructions listed previously.2. Scroll to the PERSONALIZATION NAME menu itemand press the EDIT button next to it.3. A keyboard will appear on the screen. Use it toenter the desired name, up to 20 characters.4. When you are done entering the name press theENTER button on the bottom of the screen.The name you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.Configure Display Keys(Base Audio System)This feature allows you to customize the functions of thefour soft keys located to the left and right of the audiodisplay. See “Configurable Radio Display Keys”under Radio with CD on page 3-94 for programminginformation.3-75