Remote Keyless Entry SystemYour keyless entry system operates on a radiofrequency subject to Federal CommunicationsCommission (FCC) Rules and with Industry Canada.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause interference, and2. This device must accept any interference received,including interference that may cause undesiredoperation of the device.This device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions:1. This device may not cause interference, and2. This device must accept any interference received,including interference that may cause undesiredoperation of the device.Changes or modifications to this system by other thanan authorized service facility could void authorization touse this equipment.At times you may notice a decrease in range. This isnormal for any remote keyless entry system. If thetransmitter does not work or if you have to stand closerto your vehicle for the transmitter to work, try this:• Check the distance. You may be too far from yourvehicle. You may need to stand closer duringrainy or snowy weather.• Check the location. Other vehicles or objects maybe blocking the signal. Take a few steps to theleft or right, hold the transmitter higher, andtry again.• Check to determine if battery replacement isnecessary. See “Battery Replacement” underRemote Keyless Entry System Operation onpage 2-6.• If you are still having trouble, see your dealer ora qualified technician for service.2-5
