Black plate (48,1)Cadillac SRX Owner Manual (GMNA-Localizing-MidEast-8087806) - 2015 -CRC 1st Edition - 5/19/1410-48 Vehicle Careshould also be performed afterreplacing a spare tire with a roadtire containing the TPMS sensor.The malfunction light and the DICmessage should go off at the nextignition cycle. The sensors arematched to the tire/wheel positions,using a TPMS relearn tool, in thefollowing order: driver side front tire,passenger side front tire, passengerside rear tire, and driver side rear.See your dealer for service or topurchase a relearn tool.There are two minutes to match thefirst tire/wheel position, andfive minutes overall to match all fourtire/wheel positions. If it takeslonger, the matching process stopsand must be restarted.The TPMS sensor matchingprocess is:1. Set the parking brake.2. Place the vehicle power mode inON/RUN/START. See IgnitionPositions on page 9-14.3. Make sure the Tire Pressure infodisplay option is turned on. Theinfo displays on the DIC can beturned on and off through theSettings menu. See DriverInformation Center (DIC) onpage 5-25.4. Use the five-way DIC control onthe right side of the steeringwheel to scroll to the TirePressure screen under the DICinfo page. See DriverInformation Center (DIC) onpage 5-25.5. Press and hold the SEL buttonlocated in the center of thefive-way DIC control.The horn sounds twice to signalthe receiver is in relearn modeand the TIRE LEARNINGACTIVE message displays onthe DIC screen.6. Start with the driver sidefront tire.7. Place the relearn tool againstthe tire sidewall, near the valvestem. Then press the button toactivate the TPMS sensor.A horn chirp confirms that thesensor identification code hasbeen matched to this tire andwheel position.8. Proceed to the passenger sidefront tire, and repeat theprocedure in Step 7.9. Proceed to the passenger siderear tire, and repeat theprocedure in Step 7.10. Proceed to the driver side reartire, and repeat the procedurein Step 7. The horn sounds twotimes to indicate the sensoridentification code has beenmatched to the driver side reartire, and the TPMS sensormatching process is no longeractive. The TIRE LEARNINGACTIVE message on the DICdisplay screen goes off.11. Press STOP to turn theignition off.
