Black plate (14,1)Cadillac SRX Owner Manual (GMNA-Localizing-MidEast-8087806) - 2015 -CRC 1st Edition - 5/19/142-14 Keys, Doors, and WindowsSetting the 3/4 ModeTo change the liftgate stop position:1. Select MAX or 3/4 mode andopen the liftgate.2. Stop the liftgate movement atthe desired height by pressingany liftgate switch. Manuallyadjust the liftgate position ifneeded.3. Press and hold 8 on theliftgate next to the latch until theturn signals flash and a beepsounds. This indicates thesetting has been recorded.The liftgate cannot be set below aminimum programmable height.If there is no light flash or sound,then the height adjustment may betoo low.Manual Operation of PowerLiftgateTo change the liftgate to manualoperation, turn the mode switch tothe OFF position.With the power liftgate disabled andall of the doors unlocked, the liftgatecan be manually opened andclosed. The effort required tooperate a power liftgate is greaterthan the effort required to operate anon-power liftgate.To open the liftgate, press the touchpad on the handle on the outside ofthe liftgate, and lift the gate open. Toclose the liftgate, use the pull cup tolower the liftgate and close. With thepower liftgate disabled, the liftgateelectric latch will still power latchonce contact is made with thestriker. Always close the liftgatebefore driving.If the RKE button is pressed whilepower operation is disabled, the turnsignals flash and the liftgate willnot move.The liftgate has an electric latch.If the battery is disconnected or haslow voltage, the liftgate will notopen. The liftgate will resumeoperation when the battery isreconnected and charged.Vehicle SecurityThis vehicle has theft-deterrentfeatures; however, they do not makethe vehicle impossible to steal.Vehicle Alarm SystemThis vehicle has an anti-theft alarmsystem.The indicator light, on theinstrument panel near thewindshield, indicates the status ofthe system.Off: Alarm system is disarmed.
