Black plate (41,1)Cadillac SRX Owner Manual (GMNA-Localizing-MidEast-8087806) - 2015 -CRC 1st Edition - 5/19/14Seats and Restraints 3-41If you are using a dualtether in the rear outboardseating position with anadjustable head restraint,route the dual tether aroundthe head restraint.If you are using a singletether in the rear outboardseating position with anadjustable head restraint,route the single tetherunder the head restraintand in between the headrestraint posts.3. Before placing a child in thechild restraint, make sure it issecurely held in place. Refer toyour child restraint manufacturerinstructions.Replacing LATCH SystemParts After a Crash{ WarningA crash can damage the LATCHsystem in the vehicle. A damagedLATCH system may not properlysecure the child restraint,resulting in serious injury or evendeath in a crash. To help makesure the LATCH system isworking properly after a crash,see your dealer to have thesystem inspected and anynecessary replacements made assoon as possible.If the vehicle has the LATCH systemand it was being used during acrash, new LATCH system partsmay be needed.New parts and repairs may benecessary even if the LATCHsystem was not being used at thetime of the crash.Securing Child Restraints(Rear Seat)When securing a child restraint in arear seating position, study theinstructions that came with the childrestraint to make sure it iscompatible with this vehicle.If the child restraint has the LATCHsystem, see Lower Anchors andTethers for Children (LATCHSystem) on page 3-36 for how andwhere to install the child restraintusing LATCH. If a child restraint issecured in the vehicle using asafety belt and it uses a top tether,see Lower Anchors and Tethers for
