114Screen Displays during Still Image RecordingReviewing a Still Image Right After RecordingYou can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been recorded.Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a setting optionand close the menu. Regardless of the [REVIEW] setting, a still image is displayed as long as you hold the PHOTObutton after recording. The still image operations menu appears when you press the SELECT/SET dial while you arereviewing a still image or right after recording one. In this menu, you can protect ( 121) or erase( 120) the image. The [REVIEW] setting is only available when the drive mode is set to (single).MENU( 25) CAMERA SETUP REVIEW •••••••2secMetering Mode Icon ( 116)Indicates the metering mode currently selected for recordingstill images.Drive Mode Icon ( 115)Indicates the drive mode currently selected for recording stillimages.Image Quality and SizeIndicates the quality and size currently selected for recordingstill images.Remaining Number of Still Images that can beRecorded on the Memory Cardflashing in red: No cardin green: 6 or more imagesin yellow: 1 to 5 imagesin red: No more images• The indication may not decrease even though a recording has beenmade, or may decrease by 2 images at once.• All indicators are displayed in green when a memory card is playedback.“ ” Card Access DisplayIndicates that the camcorder is writing on the memory card.
