91CustomizationReading a Custom Preset File from a Still ImageWith the custom function [PHOTO BUTTON] ( 95) you can select to save the custom preset settingscurrently in use along with a still image recorded in mode (simultaneous recording, 113).This is very useful when you want to load the custom preset file later by selecting the still image takenat a specific scene.1. Select the still image that contains the custom preset file you want to read.Use the + / – buttons to move between the still images. If a still image contains a custom presetfile, appears.2. Open the menu, select [CUSTOMIZE] and then select [META DATA CP].3. Select [ CARD CAMERA] from the column on the left.4. From the bottom bar, select [ SELECT POSITION] and select the preset numberunder which you want to store the file on the camcorder.5. Select [ EXECUTE] and in the confirmation screen select [EXECUTE] to load thefile.6. Close the menu.Custom preset files 7 to 9 are predefined settings designed for specific scenes.- These 3 custom preset files are protected and, as long as the protection is not removed, cannot beoverwritten.- Even if you deleted or changed the sample custom preset files, you can reset them to the originalvalues by resetting all the camcorder’s settings. Open the menu and select [SYSTEM SETUP/ ].Select [RESET ALL] and select [YES] in the confirmation screen.- After resetting custom preset files 1 to 6 with the [ RESET] option, they will all contain the samedefault settings.*All other settings are left at their neutral values.Custom Preset [7 VIDEO.C] For playback on a consumer-level monitor.[BLK] = [PRESS], [PED] = -2, [SET] = -2Custom Preset [8 CINE.V] For playback on a monitor TV with a film-like feel.[GAM] = [CINE1], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = -4,[CMX] = [CINE1], [CGN] = -20, [CPH] = 5, [RBM] = -5, [GRM] = -5[GBM] = -5, [BRM] = 5, [BGM] = 12Custom Preset [9 CINE.F] For video transfer to film.[GAM] = [CINE2], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = 6,[CMX] = [CINE2], [RGN] = -8
