1261 Available only when recording in standard definition (SD).2 only.[DV REC MODE]: When recording in standard definition (SD mode) only, you can choose between SP(standard play) and LP (long play). LP extends the tape usage by 1.5 times.Depending on the tape and its usage condition, picture and sound recorded in LP mode may bedistorted. We recommend using SP mode for important recordings.If you record in both SP and LP modes on the same tape, the playback picture may becomedistorted, and the time code may not be written correctly.If you play back on this camcorder, a tape that was recorded in LP mode with another digital deviceor vice versa, the picture and sound may become distorted.1 Available only when recording in standard definition (SD).[OUTPUT LEVEL]: Select the amplitude of the audio output signal. RECORDING SETUPMenu item Setting optionsDV REC MODE SP, LP 1 – – 102UB REC2 INT.USR-BIT, EXT.USR-BIT – – – 46UB SELECT 00 00 00 00, TIME, DATE – – 46IMG QUALITY SUPER FINE, FINE, NORMAL – 110IMAGE SIZE [SIGNAL STD.] is set to [HD] or [SD16:9]:LW 1920x1080, SW 848X480[SIGNAL STD.] is set to [SD4:3]:L 1440x1080, S 640X480– – – 110LW 1920x1080, SW 848X480,L 1440x1080, S 640X480– – –HD IMG SIZE LW 1920x1080, SW 848X480 – – – 113FILE NOS. RESET, CONTINUOUS – 111 AUDIO SETUPMenu item Setting optionsAUD.M.SET CH , CH , MIX/FIXED, MIX/VAR. – – – 50MIX BALANCE – – – 81DV AUDIO 16bit, 12bit 1 – – 47MONITOR SEL. NORMAL, LINE OUT – – – 81OUTPUT LEVEL 1Vrms, 2Vrms – 81OUTPUT CH CH /CH , CH /CH , CH /CH ,ALL CH/ALL CH– – 81CH /CH , CH /CH ,CH /CH , ALL CH/ALL CH– – –CH1 INPUT INT/EXT MIC, XLR MIC, XLR LINE – – 48CH2 INPUT – – 48XLR REC CH CH1, CH1/CH2 – – 49LOW CUT OFF, LC1, LC2 – – 47MIC SENSIT. NORMAL, HIGH – – 47XLR 1 TRIM +12dB, +6dB, 0dB, -6dB, -12dB – – 49XLR 2 TRIMXLR ALC LINK LINK, SEP – – 49AUD.LIMITER ON, OFF – – 491/2 3/41/2 3/4
