120Erasing Still imagesYou can erase still images one at a time or all at once. Be careful when erasing still images. Erased still images cannot be recovered. Erasing a still image that had a custom preset file embedded (recorded with the[PHOTO + CP DATA] setting) will erase the still image and the embedded custom preset file.Protected still images ( 121) cannot be erased.Erasing a Single Still Image1. Select the still image you wish to erase.2. Press the SELECT/SET dial to open the still image operations menu.In mode, the menu appears when you press the dial while you are reviewing a still image,or immediately after recording a still image.3. Select [ IMAGE ERASE].4. Select [ERASE].The image is erased and the previous image appears.5. Select [ CLOSE] to close the menu.Erasing All Images1. Open the menu and select [CARD OPERATIONS].2. Select [ERASE ALL IMAGES].3. Select [YES] and close the menu.All still images except the protected ones are erased.MENU( 25) CARD OPERATIONS ERASE ALL IMAGES
