Advanced Guide TroubleshootingContents > Routine Maintenance > Cleaning the Paper Feed RollerCleaning the Paper Feed RollerIf the Paper Feed Roller is dirty or paper powder is attached to it, paper may not be fed properly.In this case, clean the Paper Feed Roller. Cleaning will wear out the Paper Feed Roller, so perform thisonly when necessary.You need to prepare: three sheets of A4 or Letter-sized plain paper1. Make sure that the power is turned on.2. Open the Paper Output Tray gently, and open the Output Tray Extension.3. Select Roller cleaning.(1) Select Settings on the HOME screen, and press the OK button.The Settings screen will appear.(2) Select Maintenance , and press the OK button.The Maintenance screen will appear.(3) Select Roller cleaning, and press the OK button.The confirmation screen will appear.(4) Select Yes, and press the OK button.(5) Select the paper source to clean (Rear tray or Cassette), and press the OKbutton.4. Clean the Paper Feed Roller without paper.(1) Follow the message to remove paper in the paper source you selected in (5) ofstep 3.(2) Press the OK button.The Paper Feed Roller will rotate as it is cleaned.5. Clean the Paper Feed Roller with paper.(1) Make sure that the Paper Feed Roller has stopped rotating, then follow themessage to load three sheets of A4 or Letter-sized plain paper in the papersource you selected in (5) of step 3.(2) Press the OK button.Page 111 of 949 pagesCleaning the Paper Feed Roller
