Auto Correction3. Make sure that Auto is selected.4. Click Red-Eye Correction.5. Click OK.Red eyes are corrected and the (Correction/Enhancement) mark appears on the upper left ofthe image.ImportantAreas other than the eyes may be corrected depending on the image.NoteClick (Compare) to display the images before and after the correction side by side so thatyou can compare and check the result.Click Reset Selected Image to undo the correction operation.If you want to apply the correction to all the selected images at once, select the Apply to allimages checkbox.Manual Correction3. Click Manual, then click Correct/Enhance.4. Click Red-Eye Correction.NoteEffect levels can be changed using the slider below Red-Eye Correction.Move the cursor over the image. The shape of the cursor changes to (Paintbrush).5. Drag to select the red area you want to correct, then click OK that appears over theimage.Page 195 of 949 pagesUsing the Red-Eye Correction Function
