3. Click Preview.Preview image appears in the Preview area.NoteColors are adjusted based on the document type selected in Select Source.4. Set Destination.5. Set Output Size.Output size options vary by the items selected in Destination.6. Adjust the scan area (cropping frame) as required.Adjust the size and position of the cropping frame (scan area) on the preview image.Adjusting Cropping Frames7. Set Image corrections as required.8. Click Scan.Scanning starts.NoteClick (Information) to open a dialog box in which you can check the current scan settings(document type, etc.).ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanningon the Scan tab of the Preferences dialog box.Scan TabRelated TopicBasic Mode TabPage topPage 603 of 949 pagesScanning in Basic Mode
