Advanced Guide > Troubleshooting > Problems with Scanning > Computer Stops Operating during ScanningComputer Stops Operating during ScanningCheck 1: Restart the computer, reduce the output resolution in ScanGear(scanner driver) and scan again.Check 2: Delete unnecessary files to obtain sufficient free hard disk space,then scan again.Error message may appear if there is not enough hard disk space to scan and save, when the imagesize is too large (such as when scanning a large document at high resolution.)Check 3: For Location of Temporary Files in MP Navigator EX, specify afolder on a drive with sufficient free space.General TabCheck 4: Multiple devices may be connected to USB ports.Disconnect other devices.Page topPage 849 of 949 pagesComputer Stops Operating during Scanning
