For details, refer to the on-screen manual: Advanced Guide .2. Load an original on the Platen Glass.Make sure to load the original correctly according to the type of original that you have selected.See Loading Originals.3. Press the Color or Black button to start scanning.MP Navigator EX will be started, the original will be scanned according to the settings specified with MPNavigator EX, and then the scanned data will be forward to the computer.Scanning... will appear while scanning the original.If you want to scan another original, load it on the Platen Glass, and press the Color or Black button again.Remove the original on the Platen Glass after scanning is completed.ImportantDo not turn off the power while the machine is operating.Do not open the Document Cover or move the loaded original until scanning is completed.NotePress the HOME button to exit the Scan menu and display the HOME screen.NoteThe position or size of the original may not be scanned correctly depending on the type of original.If the scan is not performed correctly, refer to the on-screen manual: Advanced Guide to changethe settings in Document Type and Document Size of MP Navigator EX to match the original andscan it again.When the program selection screen appears:The program selection screen may appear after performing step 3.If the program selection screen appears, select MP Navigator EX Ver3.0 and click OK.To start MP Navigator EX automatically without displaying the program selection screen, follow theprocedure below.For Windows Vista users, refer to "For Windows Users" in " Troubleshooting" of the on-screenmanual: Advanced Guide .For Windows XP users, select MP Navigator EX Ver3.0 as the software application to be used inthe program selection screen, select Always use this program for this action, then click OK.Page topPage 44 of 949 pagesForwarding Scanned Data to the Computer
