Settings are not retained when you switch between modes.3. Set Color Mode.Input Settings4. Click Preview.Preview image appears in the Preview area.NoteIf you scan without preview, the show-through reduction function will be active. This function isuseful when scanning magazines. However, when scanning photos, the color tone of thescanned image may differ from the source due to the show-through reduction function. In thatcase, use preview first.5. Set Output Settings.Output Settings6. Adjust the cropping frame (scan area), correct image and adjust colors as required.Adjusting Cropping FramesImage SettingsColor Adjustment Buttons7. Click Scan.Scanning starts.NoteClick (Information) to open a dialog box in which you can check the current scan settings(document type, etc.).ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanningon the Scan tab of the Preferences dialog box.Scan TabRelated TopicAdvanced Mode TabPage 605 of 949 pagesScanning in Advanced Mode
