Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >Switching the Paper Source to Match the PurposeSwitching the Paper Source to Match the PurposeIn this machine, there are two paper sources, a rear tray and a cassette.You can facilitate printing by selecting a paper source setting that matches your print conditions orpurpose.The procedure for setting paper source is as follows:You can also set the paper source on the Quick Setup tab.1. Open the printer driver setup window2. Select the paper sourceFrom the Paper Source list on the Main tab, select the paper source that matches your purpose.Automatically SelectPlain paper whose Page Size is Letter 8.5"x11", A5, A4, or B5 is fed from the cassette. Other sizes ofplain paper and paper types other than plain paper are fed from the rear tray.Rear TrayPaper is always fed from the rear tray.CassettePaper is always fed from the cassette.ImportantPlain paper that is not Letter 8.5"x11", A5, A4, or B5 and paper types other than plain papercannot be fed from the cassette.Continuous AutofeedWhen plain paper runs out in the specified paper source, the printer automatically switches thepaper source.When printing a large volume of data, load plain paper of the same size in both paper sources. Youcan therefore reduce the trouble of having to load paper because the printer automatically switchesPage 359 of 1086 pagesSwitching the Paper Source to Match the Purpose
