Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > InputSettingsInput SettingsInput Settings allows you to set the following items:Select SourceThe type of document to be scanned is displayed. Platen is set by default.Paper SizeSelect the size of the document to be scanned. This setting is available in whole film image view only.When you select a size, the Preview area size changes accordingly.ImportantSome applications have a limit to the amount of scan data they can receive. ScanGear (scannerdriver) can scan data that is of:- 21000 pixels x 30000 pixels or less (and 1.8 GB or less in data size)If you change Paper Size after previewing, the preview image will be deleted.NoteIf you are not sure which size you should select for Paper Size, set Paper Size to Full Platen, thenmeasure the size of the document and enter the values into (Width) and (Height).Film SizeSelect the size of the film to be scanned.NoteThis setting is available in whole film image view only. In thumbnail view, click (FilmThumbnail) on the Toolbar.Page 729 of 1086 pagesInput Settings
