Advanced settingsDate displaySelects the format of date that is printed or displayed on the screen.Read/write attributeSelects whether to use the Card Slot of the machine as the memory card drive of a computer.Power save settingSelects the length of wait time until the machine enters the Power save mode.The machine enters the Power save mode if not operated for a certain time interval. In the Powersave mode, the FAU (Film Adapter Unit) lamp will be turned off to reduce the power consumption ofthe machine.The default setting is 15 minutes.Quiet modeEnables this function if you want to reduce the operating noise of the machine, such as when usingthe machine at night (when copying, printing from the memory card, printing from the PictBridgecompliant device, printing with wireless communication, etc.).Guide display settingsChanges the time interval before the guide display, such as Change set. and Copy, appears at thetop of the LCD, or hides the guide display.Key repeatEnables to increase or decrease numbers rapidly by pressing and holding down the button wheninputting numbers. When this setting is disabled, holding down the button is the same as pressingit once.Mobile phone print settingSpecifies paper or image correction when you print from the wireless communication device.Bluetooth settingsChanges the Bluetooth settings, such as the device name or passkey. This setting appears onlywhen the optional Bluetooth Unit is connected to the machine.PictBridge print settingsSpecifies paper, print quality, etc. when you print from the PictBridge compliant device.Language selectionChanges the language for LCD messages and menus.Reset settingSets the machine settings back to the default. (However, the settings configured in LAN settings, thevalues set for the print head alignment, the setting in Read/write attribute, and the language set inLanguage selection will not be reset.)Page 81 of 1086 pagesMachine Settings
