Advanced Guide TroubleshootingContents > Printing Photos from Printed Photos or Films > Loading the Films > Loading the Mount FilmsLoading the Mount FilmsLoad the Film Guide without the Film Strip Frame on the Platen Glass, and then mount the mount filmsin the Film Guide. To scan the mount films with a computer, follow the same procedure below.1. Remove the Film Guide behind the FAU Protective Sheet.(1) Open the Document Cover, and remove the FAU Protective Sheet from theDocument Cover.(2) Remove the Film Guide behind the FAU Protective Sheet.ImportantWhen printing photos from the film, make sure that the FAU Protective Sheet is removedfrom the Document Cover. The mount films cannot be scanned if the FAU Protective Sheetremains attached.2. Remove the Film Strip Frame (A) from the Film Guide (B).(1) Pinch the indentations (C) in the directions of the arrows as shown to open theFilm Holder (D).(2) Pinch the indentations (E) in the directions of the arrows as shown to removethe Film Strip Frame (A) from the Film Guide (B).Page 46 of 1086 pagesLoading the Mount Films
