Advanced Guide > Scanning > Forwarding Scanned Data to PC Using the Operation Panel of the Machine > ForwardingScanned Data to PC Using the Operation Panel of the MachineForwarding Scanned Data to PC Using the Operation Panel ofthe MachineYou can forward scanned data to PC using the Operation Panel of the machine.Before forwarding scanned data to PC, confirm the following:The necessary application software (MP Drivers and MP Navigator EX)are installed.If the application software (MP Drivers and MP Navigator EX) are not yet installed, insert the SetupCD-ROM into the computer's disc drive, then perform Custom Install and select MP Drivers and MPNavigator EX.The machine is connected to a computer correctly.Make sure that the machine is connected to the computer correctly.Do not plug or unplug the USB or LAN cable when scanning images with the machine, or when thecomputer is in sleep or standby mode.If you perform scanning via the LAN connection, make sure that all the required settings have beenspecified. For details, refer to Network Scan Settings .The operation after scanning the original is specified in MP NavigatorEX.MP Navigator EX enables you to specify the response resulting from pressing the Color or Blackbutton on the machine. You can specify the response individually for each event. For details, refer toSelecting a Response to Commands from the Operation Panel Using MP Navigator EX .1. Set the starting application.If you are using Mac OS X v.10.5.x or Mac OS X v.10.4.x:This operation is not necessary.If you are using Mac OS X v.10.3.9:You need to set MP Navigator EX as the starting application software in Image Capture underApplications of Mac OS X.Select Applications on the Go menu, then double-click the Image Capture icon. Click Options at thelower left of the scanner window, select MP Navigator EX 3 in Application to launch when thescanner button is pressed:, then click OK. To quit Image Capture, select Quit Image Capture on theImage Capture menu.ImportantIf Options is not displayed, select Preferences on the Image Capture menu, click Scanner, andclick Use TWAIN software whenever possible to clear the option. Then quit Image Capture andrestart it.2. Make sure that the machine is turned on.3. Load the original on the Platen Glass.NoteRefer to Placing Documents for how to load the original on the Platen Glass.Page 504 of 1086 pagesForwarding Scanned Data to PC Using the Operation Panel of the Machine
