Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens >Image SettingsImage SettingsImportantDo not apply these functions to images without moire, dust/scratches or faded colors. The colortone may be adversely affected.Image correction results may not be reflected in the preview image.NoteSelectable settings depend on color mode settings.Scanning may take longer when you use Image Settings.Image Settings allows you to set the following items:NoteThe setting items vary depending on whether Select Source is Platen or film.Image AdjustmentWhen Image Adjustment is set, the brightness of the specified portion of the image is optimized.Images can be adjusted according to the automatically detected document type or the specifieddocument type. The result of the adjustment will be reflected in the entire image. When Select Sourceis Platen, the default setting is Auto. When Select Source is film, the default settings is Photo.NoneImage Adjustment will not be applied.AutoApplies Image Adjustment by automatically detecting the document type. It is recommended thatyou normally select this setting.Page 734 of 1086 pagesImage Settings