type of each media from Media Type and either Fine Art A4 or Fine Art Letter from Page Size or Papersize.Confirm the settings following the procedure below, and try printing again.1. Ensure that either Fine Art A4 or Fine Art Letter is selected in the application.If the page size you want to use is not displayed, open the File menu of the application andselect Print. Then make sure that the name of your printer is selected.2. Make sure that the paper selected for Media Type in the Main sheet (Windows)or the Print dialog box (Macintosh) in the printer driver matches the paper loadedin the machine.3. Ensure that the Page Size setting in the Page Setup tab (Windows) or the Papersize setting in the Page Setup dialog box (Macintosh) in the printer driver is thesame as the size set in step 1.Check 9: Make sure that your machine's name is selected in the Printdialog box.The machine will not print properly if you are using a driver for a different printer.In Windows, make sure that your machine's name is selected in the Print dialog box.In Macintosh, make sure that your machine's name is selected in Printer in the Print dialog box.NoteTo make the machine the one selected by default, select Set as Default Printer (Windows),Default Printer or Make Default (Macintosh).Check 10: Configure the printer port appropriately.Make sure that the printer port is configured appropriately in the printer driver.1. Log on as a user account with administrator privilege.2. Click Control Panel, then Printer under Hardware and Sound.In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes.In Windows 2000, click Control Panel then Printers.3. Right-click the Canon XXX Printer icon, then select Properties.4. Click the Ports tab to confirm the port settings.Make sure that a port named USBnnn (where "n" is a number) with Canon XXX Printerappearing in the Printer column is selected for Print to the following port(s).If the setting is incorrect, reinstall the MP Drivers or change the printer port to the correct one.NoteWhen the machine is used over LAN, the port name of the machine is displayed as"CNBJNP_xxxxxxxxxx".* "xxxxxxxxxx" is the character string generated from the MAC address or a character stringspecified by the user when setting up the machine.Check 11: Is the size of the print data extremely large?Click Print Options on the Page Setup sheet. Then, select the Prevent loss of print data check box inthe displayed dialog.Page 930 of 1086 pagesPrinting Does Not Start
