3. Read the confirmation, make sure Canon BJC-55 is selected, andthen click the OK button.4. Click the Close button.5. Click the “x” in the upper right corner to close the System Propertieswindow.6. Disconnect the USB cable from the computer.7. On the desktop, click the Start button, and then click Shut Down.8. Click Restart and then click the OK button.After the computer has re-started, follow the procedure in GettingStarted to install the USB printer driver again.Application Error or General Protection Faultappears on the screenAn application error or general protection fault are Windows systemerrors. For more details, see your Windows on-line Help.Check to see if you are using Windows 3.1 applicationsoftwareIf you use Windows 3.1 application software on Windows 98/Windows95/Windows 2000, it may not operate correctly and could cause anerror. Use only Windows 98/Windows 95/Windows 2000 softwareapplications. Contact the software manufacturer and inquire about anupdated version of your Windows 3.1 software application.Check to see if one of the following messages has beendisplayedCannot execute print due to insufficientmemory.Refer to the software application manual for the amount of memoryWindowsWindowsWindows104 Chapter 6 Troubleshooting
