3. From the Start menu, choose Find, then click on Files or Folders.This displays the Find All Files dialog box.4. Enter the file name Infrared.txt in the Named box, and then clickon the Find Now button. (Normally, these files exist under theWindows directory.)5. The Infrared.txt file describes the procedures for installing andusing the IR Communications Driver Version 2.0. Please read thecontents of the file carefully.Using infra-red data transmissionFollow this procedure to set up the printer for data transfer via the IrDAinterface.1. The printer IrDA interface is on the left side of the printer.2. Locate the IrDA interface on the computer. Arrange the printer sothe IrDA interface ports are facing one another.The IrDA interface ports must face one another and be approximatelylevel, within a range of about 15 degrees left or right, approx. 15degrees up or down and not more than 80 cm (31.49 inches) apart.**May vary depending on the specific computer, PDA, and communication protocol used.35Chapter 2 Setting Up the Printer2IrDA interface
