POWER buttonPress to switch the printer on and off. (+32)POWER lampFlashes for a few moments after power on and then lights and stays onto indicate that the printer is ready for normal operation.The POWER lamp flashes in the following situations:• During print head cleaning after you switch the printer on. The printhead is cleaned automatically every time you switch on the printer.When the POWER lamp stops flashing, print head cleaning isfinished and the printer is ready for operation.• During print head cleaning or flushing started from the operationpanel with the RESUME button, from the Windows printer driver.• When the last page of a print job does not print.• While you are performing routine print head maintenance such asreplacing an ink cartridge, replacing a BJ Cartridge, changing BJCartridges, or replacing the BJ Cartridge with the Color ImageScanner Cartridge IS-12.• During printing the Nozzle Check Pattern.RESUME buttonPress to cancel errors and warnings. The RESUME button alsoperforms these important functions:• Error recovery. After an error occurs, press once to return the printerto the normal operation mode.• Paper Feed. If the POWER lamp is flashing to signal that dataremains to be printed, insert a sheet of paper in the printer and pressRESUME once to print the remaining page of data.• Print head cleaning. Press and hold down the RESUME button fortwo seconds until the printer beeps twice then release to start printhead cleaning. The POWER lamp flashes during print head cleaning.(+85)27Chapter 2 Setting Up the Printer2
