Selecting USBPRNxx: as the printer port1. Click Start, point to Settings, and click Printers.2. Right-click Canon BJC-55 and then click Properties.3. Click the Details tab.4. Go to Print to the following port and then select USBPRNxx:(Printer Port).If the problem persists make sure the printer port (USBPRNxx) isoperating normally.Checking operation status of USBPRNxx1. Click Start, point to Settings and click Control Panel.2. Double-click the System icon.3. Click the Device Manager tab.4. Double-click Ports (Universal Serial Bus Controller) and double-click Canon BJC-55.5. Click the General tab.Under Device Status, read the information regarding printer portstatus. If the message tells you that the device is not performingnormally, remove the BJC-55 device, and then execute theinstallation again.97Chapter 6 Troubleshooting6
