35Getting Ready to PrintSetting Up and Using a Wireless ConnectionIf you have a computer with an infrared port for wireless data transmission, you can setup a cordless connection with the printer using the IrDA method to effect infrared datatransmission.Before you can set up an infrared connection with the printer, you must perform severalsettings on the computer. Make sure that you read the section below before you set up theconnection. What You Need for Infrared Data TransmissionIn order to use infrared data transmission, you need the Windows 98 or Windows 2000 plugand play Microsoft infrared driver Version 3.0. The following items are required in order toset up wireless data transmission between the printer and computer via the infrared portson the printer and your computer.Computer IBM PC/AT or a compatible computerCPU Intel® Pentium® or fasterIrDA IrDA 1.1 or laterBaud rate(transmission speed)Max. 4 MbpsInfrared transmissiondeviceBuilt-in infrared port on the computer, or an infraredtransmission adapter connected to the parallel or serialport.Operating system Windows 98 or Windows 2000BJC-55.book Page 35 Tuesday, August 15, 2000 2:08 AM
