One-Touch Buttons4-36Specifying Destinations Easily and Quickly4NOTE• You can select multiple one-touch buttons.• To cancel the selected one-touch button, press [One-touch Buttons] ➞ press theselected one-touch button again.• The destinations you can specify may vary depending on the settings under Restriction Settings>. (See Chapter 4, “Customizing Settings,” in the Remote UIGuide.) For example, if E-mail Send is set to ‘Do not allow’ or ‘Only allow sending toown address’, the one-touch buttons containing e-mail addresses or I-fax addressesare grayed out.• If the settings under areconfigured to display an authentication screen, do not specify multiple file serveraddresses at the same time. (See Chapter 4, “Customizing Settings,” in the Remote UIGuide.) If you specify multiple file server addresses, an error message appears whenyou press (Start) in step 4.● If you want to check the selected destination:❑ Press [Details] ➞ check the destination’s information ➞ press [Done].If the destination is a group address, select one destination at a time ➞ press[Details] ➞ check the destination’s information ➞ press [Done] twice.For help, see step 3 in “Using the Address Book,” on p. 4-24.2 Select the desired one-touchbutton.Each one-touch button is assigned a threedigit number. If you know the one-touchbutton’s three digit number, enter thenumber for the desired one-touch buttonusing - (numeric keys).Press [ ] or [ ] to scroll to the desiredone-touch button if it is not displayed.3 Press [Done].The selected destination appears on the topscreen.
