Specifying the Document Size3-6Specifying the Scan Settings3Specifying the Document SizeYou can manually specify the document size when the machine cannot detect thepaper size automatically, such as when scanning transparencies.IMPORTANT• The machine cannot automatically detect the size of the originals listed below. Specifythe size of these documents manually.- Nonstandard size originals- Highly transparent originals, such as transparencies- Originals with an extremely dark background- A5R or smaller than A5 originals that are placed on the platen glass (A5 originals areavailable on imageRUNNER 2545i/2545/2535i/2535)• If a document size setting other than [Auto] is specified, the following modes cannot beused:- Different Size Originals (See “Scanning Different Size Originals Together (DifferentSize Originals),” on p. 3-15.)- Stamp (See “Stamping Originals Which Have Already Been Scanned,” on p. 3-23.)• If you place your originals into the feeder, their horizontal length (X) to the scanningdirection is scanned at the actual size of your originals even if you manually specify thedocument size different from your originals. The vertical length (Y) to the scanningdirection is scanned at the document size you specify manually.NOTEThe default setting is ‘Auto’.
