LDAP Server 4-65Specifying Destinations Easily and Quickly4Registering in the One-Touch Button1 Display the Register One-touch Button screen ➞ press [Register/Edit].For help, see steps 1 and 2 in “Registering the One-Touch Buttons,” on p. 4-31.3 Follow steps 2 to 4 in “Specifying Addresses via an LDAP Server,”on p. 4-55 to search destinations.To continue searching, press [Back].NOTE• To cancel a selected destination, select the destination again to clear the check mark.• If both the Send function (optional for the imageRUNNER 2545/2535/2530/2525/2520)is activated and the optional Super G3 Fax Board-AG1 is attached to the machine, youcan sort and limit the view of the displayed addresses by using the Type drop-downlist.• The destinations you can specify may vary depending on the settings under Restriction Settings>. (See Chapter 4, “Customizing Settings,” in the Remote UIGuide.) For example, if E-mail Send is set to ‘Do not allow’ or ‘Only allow sending toown address’, e-mail addresses are not displayed as the search results.2 Press [Network Add. Book].4 Select the desired destinationfrom the search results.You cannot select multiple destinations at atime.If you press [Register e-mail address forI-Fax], the selected e-mail address can beregistered as an I-fax destination. Toregister e-mail addresses as I-faxaddresses, register one e-mail address at atime.
